How To Make Woodworking Project Easier And More Fun

If you are talented with your hands, then you should try woodworking. Woodworking, or making great looking items out of wood, is a centuries old practice. Anyone can fall in love with a piece of wood that looks great, and with these tips you too can better your skills.

Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.

Keep the floors safe in your woodworking shop. Dust builds up on the floor, making it dangerous for walking. Coat the slippery areas of your shop with a mixture of crushed walnut shells and paint. The walnut shells are just the right consistency to keep the floor rough enough for walking, even when sawdust builds up.

Whenever you work with wood, wear a pair of safety glasses and a dust mask to keep yourself safe. When cutting or even hammering into wood, pieces can fly up into your eyes or be breathed in. This can lead to health issues which can end your enjoyment of this pursuit for good.

Dust can ruin the finish of any woodworking project. Keep dust away from your projects and workbench by vacuuming it up. If you blow or brush it away, it will just land somewhere else, likely back on your project. Also, use a damp cloth to wipe all surfaces before you begin top-coating, or staining.

Before practicing advanced woodworking techniques, make sure you’ve got the basics down. Typically those advanced techniques rely on you knowing the basics like the back of your hand. If you don’t, you’ll more than likely find learning to be a very frustrating experience. So start slow, and work up from there.

Before you start any woodworking project, get all of the tools you will need for the project ready. Always remember to bring a calculator and tape measure with you when you go to purchase your wood. Make sure you have any specialty tools you will need for your project available as well.

Stir, never shake stains and finishes before use. Over time, these settle, so mixing is necessary. Shaking, however, adds bubbles and doesn’t always mix the stain or finish thoroughly. Stirring mixes the products better by evenly mixing in any settlement that occurred during storage. Stains and finishes that are not mixed thoroughly will not apply correctly to the wood you’re staining and are at risk of looking blotchy.

Take baby steps when first starting out with woodworking. It’s a lot of fun to learn, but woodworking is also pretty dangerous if you get too cocky too soon. Even when you feel like you know the basics, keep practicing them. And always where safety gear. You are much better off.

Always measure twice and cut once when working with wood. Most woodworkers have heard this; however, most do not follow this advice. Simply double checking to ensure that your measurements are correct can save you both time and money. Additionally, ensure that you have an accurate tape measure for best results.

Always wear proper eye protection before using any power tools. Wood chips can fly and stab you in the eye resulting in a trip to the emergency room. To protect yourself wear safety glasses that have side shield to help protect your eyes from flying debris produced from using power tools.

Woodworking is a wonderful way for you to work with your hands. Now that you know more about woodworking, you’re ready to make your own pieces out of wood. You should apply the tips you just read and keep practicing on your woodworking.